Many customers have purchased welding pipe machine equipment without undergoing short-term maintenance, which has resulted in oil flux everywhere on the outside of the welding pipe machine and local rust on the machine. Below, to prolong the lifespan of a machine, not only do you need to buy high-quality ones, but maintenance in the later stages also plays a very important role. Below, the editor will share with you some maintenance experiences of welding pipe machines.

1. Regularly check the oil level gauge on the fuel tank and ensure that the oil level does not fall below the specified value.

2. When the fine oil filter is blocked by dirt, it needs to be replaced in a timely manner; When the crude oil filter is blocked, it should be cleaned in a timely manner, once every 3 months.

3. To add oil to the fuel tank, it must be filtered and the oil must not be mixed with impurities such as water, rust, metal shavings, and fibers.

4. When starting the oil pump in winter or cold areas, it should be started, stopped, and repeated several times to increase the oil temperature. The hydraulic pump station should be operated flexibly before starting work.

5. All knobs on the hydraulic pump station must not be moved by non operators.

6. Regularly observe if there are abnormal fluctuations in the power supply voltage, and conduct maintenance every 3 months or so.

In fact, the correct maintenance of the pipe making machine in the later stage is crucial for the quality and lifespan of the machine. So, we must insist on maintenance.